It’s inevitable. No matter how cautious you might be, holes in your drywall are going to happen. Fortunately, no matter how extensive the damage, it’s fixable.
I’ve had to do this myself and located it is best to observe your texture method on a scrap piece of drywall. You can buy a complete 4 foot by 8 foot sheet for lower than $10 and lower it into 4 sections so that it’ll fit into your car if you do not have a truck. Allow the textured compound to dry based on the producer’s directions, then prime and paint the surface.
Now it’s time to reduce a patch. First, reduce a piece of drywall that is slightly bigger than the opening you are trying to repair. Even a piece of scrap drywall will work, so long as it has straight edges. To lower the drywall, you’ll be able to either lower it with the drywall saw or use a blade knife to score and snap it, scoring the front using the blade knife and a straight edge, then snapping it in two pieces. You’ll also need to attain the back along the snap line.
The additional energy offered by this patch equipment primarily comes from the fact that it’s fabricated from galvanized metal. The patch is also self-adhesive saving you from having to lay down a base coat of compound before you get started. For probably the most half, as a result of distinctive nature of the compound, the Wall Doctor is best for painted walls where the shortage of texturing will not be fairly as noticeable. In this text, we’ll inform you how one can fix each a small and a big drywall gap. We’ll start with a small hole on the subsequent page.
Cut a patch. On the face of the brand new drywall, cut a patch 3 inches bigger than the opening. Turn the brand new drywall over and cut one and a half inches off both sides with the razor knife. Be careful to not reduce via the face paper. Carefully peel the one a half inch pieces off of the face paper and discard. Clean the back of face paper on the patch to take away any bits.